Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

'10 Wrangler Trans Lines

  • Tutti57
  • Tutti57's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
7 years 11 months ago #21064 by Tutti57
'10 Wrangler Trans Lines was created by Tutti57
My cousin dropped his Jeep off and asked me to put new lines in it. I took a quick look tonight and didnt see an easy access point to disconnect the lines at the radiator.

Has anyone done this and found a decent way to get to those lines? It looks like the ones at the transmission arent too bad to get too. I think they are a quick connect set up at the ends. I have the new lines and the little junction block where the lines meet at the radiator.

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
7 years 11 months ago #21073 by Tyler
Replied by Tyler on topic '10 Wrangler Trans Lines
Can't say I've ever replaced those lines before. Trying to remember what the cooler line routing looks like on these... Would removing the fan shroud help at all?

Please Log in or Create an account to join the conversation.

  • Tutti57
  • Tutti57's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
7 years 11 months ago #21085 by Tutti57
Replied by Tutti57 on topic '10 Wrangler Trans Lines
The leak was at some easily accessible flex hoses so I just cut those out and put new ones in. Thanks though!

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
7 years 11 months ago #21091 by Tyler
Replied by Tyler on topic '10 Wrangler Trans Lines

Tutti57 wrote: The leak was at some easily accessible flex hoses so I just cut those out and put new ones in. Thanks though!


Nice. B) This is my preferred way when getting the lines out is surgery.

Please Log in or Create an account to join the conversation.

Time to create page: 0.263 seconds