Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

[FIXED] GM vortec cam retard

More
5 years 11 months ago - 5 years 11 months ago #20883 by bullitt4514
[FIXED] GM vortec cam retard was created by bullitt4514
I have an elmscan 5 that I use with my laptop. I think I found the pid for adjusting the can retard , but wanted to verify. Got the suburban up and running , but this value says the timing is at 24 degrees !

Attachments:
Last edit: 5 years 11 months ago by bullitt4514.

Please Log in or Create an account to join the conversation.

More
5 years 11 months ago #20906 by Tyler
Replied by Tyler on topic GM vortec can retard
I think that's the one. :cheer: Don't forget to raise the engine speed above 1000 RPM to update that PID during adjustment.

Please Log in or Create an account to join the conversation.

More
5 years 11 months ago - 5 years 11 months ago #20976 by bullitt4514
Replied by bullitt4514 on topic [Fixed] GM vortec can retard

Tyler wrote: I think that's the one. :cheer: Don't forget to raise the engine speed above 1000 RPM to update that PID during adjustment.


It is set, only took 3 tries to set it properly :lol: It actually ran with timing that retarded.




[img
Last edit: 5 years 11 months ago by bullitt4514.

Please Log in or Create an account to join the conversation.

More
5 years 11 months ago #20978 by Tyler
Replied by Tyler on topic [Fixed] GM vortec can retard
Nice. B) What do you think of that ScanXL software? I see it's about $90 plus some kind of GM add-on. Worth it?

Please Log in or Create an account to join the conversation.

Time to create page: 0.196 seconds