*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

DISTRIBUTOR CAP 92 LEBARON 3.0 V6

  • JTF010
  • JTF010's Avatar Topic Author
  • Away
  • New Member
  • New Member
More
7 months 3 weeks ago #81012 by JTF010
DISTRIBUTOR CAP 92 LEBARON 3.0 V6 was created by JTF010
Vehicle misfiring, found corrosion in half of the cap on top side, melted in middle and rust on coil wire, underside of cap is good no carbon tracks or corrosion. What could cause this? And how can I find a fully ignition part on an old car like this?

Please Log in or Create an account to join the conversation.

  • Lupe
  • Lupe's Avatar
  • Away
  • Premium Member
  • Premium Member
More
7 months 2 weeks ago #81093 by Lupe
Replied by Lupe on topic DISTRIBUTOR CAP 92 LEBARON 3.0 V6
sounds like you found the problem, the cause , maybe they were use to washing engine . you might want to do a full tune up coil , cap, rotor, spark plugs, clean or repair wire. your part store should have them

Please Log in or Create an account to join the conversation.

  • Lupe
  • Lupe's Avatar
  • Away
  • Premium Member
  • Premium Member
More
7 months 2 weeks ago #81094 by Lupe
Replied by Lupe on topic DISTRIBUTOR CAP 92 LEBARON 3.0 V6
have you got scanner danners book and become a member to premium channel , its a great deal . mine has just expired and i'm going to renew .

Please Log in or Create an account to join the conversation.

Time to create page: 0.352 seconds