Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
Good day love your videos. I have a Peugeot 207 2011 1.4 16v that i recond the motor. As i connected the wiring one of the wires fell on the distributor nuts and made a short. Since then it was a no crank no start issue. Pls can you give me some advice?
you'll need a good wiring diag , then check all fuses, and you might start with that wire that got shorted it have melted some where or where it goes. with a wiring diag like alldata you trace where you don't have power even the ecm for powers and grounds . good luck !
