Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
I am working on a 2003 dodge grand caravan 3.8 cranks but doesn't start. Has good spark and fuel pressure. the injectors don't seem to be firing i am showing a code of 118 and 123 would this cause a no pulse situation at the injectors. I am lost at this point The manual I have doesn't have a good schematic of the wires going to the computer just block diagrams. doesn't show pin locations so I am having a rough time tracing wires.
Back story is owner was driving and tire blew out the shredded tire then took out the plastic wheel well and hit the wiring before he got it stopped. when i received the van he had taped up the wires taping about 4 bare wires together. I have separated the wires and made necessary repairs to them. I now have power to the driver compartment but no start.any help would be greatly appreciated.
