*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Disengage immobilizer

  • Shark1
  • Shark1's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
1 year 3 days ago #67413 by Shark1
Disengage immobilizer was created by Shark1
2001nissan Pathfinder 6cyl 3.5 4wd. AutoZone worker was supposed to scan for codes. He put the exterior door key in ignition and tried to get it to on. Activated security system. It's a split system fob works fine. Ignition key has pellet. Key in to on hard light. Key out blinking security light. Watched the video on the elderado found the resistance? Or voltage level. Cut the security wire under used resister gauge decreased it.used resister on each wire closed wire vehicle cranked and started. Would that work on my Nissan Pathfinder.

Please Log in or Create an account to join the conversation.

Time to create page: 0.268 seconds