Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
I have a 2002 Mazda 626, 2.0l engine, All new sensors. New fuel pump, filter and injectors. New computer. All new sensors. New coil pack. Car cranks but wont start. Good fuel pressure. Good spark. Good compression. Fuel is getting to the fuel rail but that's it. The injectors are not spraying the fuel like they should. Noid light shows all injectors are working. I can't figure out the problem. It does not have the anti theft system . I've literally tried everything and have worked on this car for 3 years.
Sensors are new and so is regulator, entire fuel system was replaced only thing that wasn’t is the fuel rail. Could the new ECM be causing this, it was suppose to be pre programmed but I guess there’s a chance it wasn’t right
Topic Author
