Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
Hi everyone,
I have a VW Golf mk6 cayc with codes 01279(longitunidal acceleration sensor adaptation), 01435 (brake pressure sensor 1 adaptation), 00778(steering angle sensor adaptation), 01423(lateral acceleration sensor)
My main concerns are= 01314 (engine control module read trouble codes - intermittent), 00285/00283 (left/right wheel speed sensors G45 electrical problem intermittent), 00668 (supply voltage terminal 30 upper/lower limit reached - intermittent) and finally 01305(databus for infotainment - no signal/no communication)
The wheel speed sensors on this car I think it's a magneto resistive active sensor. It's a two wire sensor 1x is ground wire and 1x is both power supply and signal. Would like someone to direct me on where to find testing methods for this type on scanner danner premium. Thank you
Last edit: 1 year 5 months ago by Chad. Reason: Removed "private" status.
The signal wire of a magnetoresistive sensor will produce a very small (about 500mv +/-) squarewave when the wheel spins.
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer." I have learned more by being wrong, than I have by being right.
The good thing about wheel speed sensors is there is usually four of them.
You can do all the checks your heart desires on a functioning one and compare results to non functioning one.