Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
2015 Ford Kuga (EU) Diesel P1102 and P02FA
- kostelectronics
-
Topic Author
- Offline
- Senior Member
-
2 months 1 week ago - 2 months 1 week ago #64738
by kostelectronics
2015 Ford Kuga (EU) Diesel P1102 and P02FA was created by kostelectronics
Hello!
This car comes from another shop and it's a really hard nut to diagnose, i need some help from you guys.
P1102 and (or) P02FA is set while deceleration (engine brake), but very random (sometimes it needs 200Km drive to reproduce this problem.
What is already done:
- Replaced MAF and MAP sensor, Anti shudder Flap, Air-Filter, EGR Valve (original)
- Smoke-Tested the intake -->no leaks found
- reset all learned values in the PCM
- Did some VE-Calculations -->all around 72% but in the moment when the problem occur (freeze-frame data based), not WOT
See the screenshot when the error occured.
Any idea what to test next?
BR Matthias
This car comes from another shop and it's a really hard nut to diagnose, i need some help from you guys.
P1102 and (or) P02FA is set while deceleration (engine brake), but very random (sometimes it needs 200Km drive to reproduce this problem.
What is already done:
- Replaced MAF and MAP sensor, Anti shudder Flap, Air-Filter, EGR Valve (original)
- Smoke-Tested the intake -->no leaks found
- reset all learned values in the PCM
- Did some VE-Calculations -->all around 72% but in the moment when the problem occur (freeze-frame data based), not WOT
See the screenshot when the error occured.
Any idea what to test next?
BR Matthias
Last edit: 2 months 1 week ago by kostelectronics.
Please Log in or Create an account to join the conversation.
Time to create page: 0.174 seconds