Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
1995 corvette starts and then dies after 3 seconds
I can crank and start car then it dies after 3 seconds. Fuel pressure stays between 38 and 40 psi, I checked injector pulse with my uscope and noticed that injector pulse dies out then car dies.
I can restart car immediately without turning key off and it continues to start, run then die
I noticed that when I put key in run position security light goes out, after starting car, security lights starts to flash and then engine dies
I don't have any schematics for this car, I'm going off my memory,.
Does the VATS system control injector pulse after vehicle is running?
