Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
Dear team
I have 2011 ford turuse 3.5
Code p2107 and p2110
We replace the throttel staill same code the 5ref and the ground and 2 wire signal is reading ok
I scope the 2 signal it show with in the range 4 and 1.2
I check the wire from thouttle to pcm it is ok
How to check if its the throttel or the pcm
It show 2 volt in each motor wire
The code id hard code not clear
The problem after thy clean from inside
I need to learn how to dagnostic the thorttel motor