*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Ford 6.4 injector control testing p0207

  • Cheryl
  • Cheryl's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
2 years 5 months ago #61228 by Cheryl
Ford 6.4 injector control testing p0207 was created by Cheryl
I ohmed out the harness from pcm through the injectors they all are in spec. Are the testing procedures the same for gasoline multi port could I use a noid light to test for control at the valve cover bill head connector?? Also getting a p2452 code goes into limp mode after accelerating

Please Log in or Create an account to join the conversation.

Time to create page: 0.303 seconds