Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Secondary waveforms.Honda fit/jazz 2003 1.4

More
1 year 3 weeks ago - 1 year 3 weeks ago #61160 by ian.evesham
Secondary waveforms.Honda fit/jazz 2003 1.4 was created by ian.evesham
hi
very new to secondary waveform analysis,so here goes.
Honda fit 1.4 dsi,captures taken from the front coils using a cop probe.
Engine is showing misfires,but not many.The car runs very poor mostly,lacking power.
Can anybody cast their eye over the pico captures.Turbulence on the burn lines of 2 and 3 stand out.no1 looks pretty good. No fault codes

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Attachments:
Last edit: 1 year 3 weeks ago by ian.evesham.

Please Log in or Create an account to join the conversation.

More
1 year 3 weeks ago #61162 by Tyler
Replied by Tyler on topic Secondary waveforms.Honda fit/jazz 2003 1.4
Unfortunately, your attachments didn't work. :( Would you try attaching them again?

Please Log in or Create an account to join the conversation.

More
1 year 3 weeks ago #61164 by ian.evesham
Replied by ian.evesham on topic Secondary waveforms.Honda fit/jazz 2003 1.4
no worries ,sorry about that

Please Log in or Create an account to join the conversation.

More
1 year 3 weeks ago #61177 by Chad
Replied by Chad on topic Secondary waveforms.Honda fit/jazz 2003 1.4
The .psdata files can be opened with Picoscope 6. I have inverted the waveforms, and captured a screenshot of one event, per file.


"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right. :-)
The following user(s) said Thank You: juergen.scholl

Please Log in or Create an account to join the conversation.

Time to create page: 0.222 seconds