*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Honda crv 12 Electrical steering doesnt working , loud grounding when turning

  • RR-Auto
  • RR-Auto's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
2 years 7 months ago #60577 by RR-Auto
hey mates I need some with Honda crv 2012 Electrical steering doesn't working and steering is so hard, and making , loud grounding when turning ,
I had27-20 / 27-21 fault code which was , angel string input and out put .
and i check i had good can positive and negative in steering angel steering. and done all calibration but it was not make it any better .
just fault code are gone since i clear the, . I could not go for long test drive since the grinding seems so louden to me
but I turned wheel for at least 20 times, and drive abit front and back for almost 30 meter . and fault did not came back yet,
I am aware there is another angel string sensor in the eps motor , but almost so hard to test the pins nead the motor with out taking its motor out,. And I have but I test the power and ground in the motor where almost 3 V in all 3 wirse .
do you have any advice for further diagnosis ?
best regards

Please Log in or Create an account to join the conversation.

Time to create page: 0.291 seconds