Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
I am wondering the correct position of the reluctor/tone ring when viewing in the hole for the
(oss) output speed sensor I understand the ring goes on the planetary and would have thought the position was automatic within a minor difference
should the reluctor ring be centered in the hole so the entire speed sensor is constantly magnetized
or should the reluctor ring be offset when viewed in the hole of the oss more towards the front of the trans towards the input speed sensor iss so there is more of a gap allowing the oss to only be partially magnetized maybe allowing for more magnetic release
I have a 4l80e broken down when I mock up to try and understand a situation of another 4l80e in a vehicle I'm noticing a difference of the position for the reluctor ring one is centered and the other is offset
photos attached are one of each items referenced above
