*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Help assembling intake manifold

  • Mobilemechanics
  • Mobilemechanics's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
2 years 8 months ago #59788 by Mobilemechanics
Help assembling intake manifold was created by Mobilemechanics
Switching all parts from old intake to new and nowhere in the disassembly or assembly list is the valve looking thing connected to two different parts of the manifold there is a spot for a harness to hook up but nothing was connected to it not sure what it is or if it's necessary to switch over any help is appreciated
Attachments:

Please Log in or Create an account to join the conversation.

  • juergen.scholl
  • juergen.scholl's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Active partschanger
More
2 years 8 months ago #59792 by juergen.scholl
Replied by juergen.scholl on topic Help assembling intake manifold
The component does have a third port where another hose might have to be connected.... It resembles an EVAP purge solenoid, you may want to look at the related electrical and vacuum diagrams in service information.
An expert is someone who knows each time more on each time less, until he finally knows absolutely everything about absolutely nothing.

Please Log in or Create an account to join the conversation.

Time to create page: 0.282 seconds