*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)
Just made a new account? Can't post? Click above.
Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
Crankshaft sensor
- HenryM
-
Topic Author
- Offline
- New Member
-
2 years 10 months ago - 2 years 10 months ago #59165
by HenryM
Crankshaft sensor was created by HenryM
Hi
I have changed the timing belt on a Peugeot 5008 with a 1.6 hdi 9hz engine. Now the engine won't start. I am absolutely sure that the timing belt is installed correctly
I get error code P0339, It looks like there is a break in the reluktor ring at approx. 138 degrees. Could this be the reason the engine won't start?
Regards Henry
I have changed the timing belt on a Peugeot 5008 with a 1.6 hdi 9hz engine. Now the engine won't start. I am absolutely sure that the timing belt is installed correctly
I get error code P0339, It looks like there is a break in the reluktor ring at approx. 138 degrees. Could this be the reason the engine won't start?
Regards Henry
Last edit: 2 years 10 months ago by HenryM.
Please Log in or Create an account to join the conversation.
Time to create page: 0.309 seconds