*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

2007 Nissan Murano, code U1000, not communicating with BCM

  • Christinak1130
  • Christinak1130's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
2 years 11 months ago #58713 by Christinak1130
2007 Nissan Murano, code U1000, not communicating with BCM was created by Christinak1130
2007 Nissan Murano is given a code U1000, says it’s not communicating with the BCM. I know we’re missing something. Change out Transmission, control, module, body control, module, and the computer. Put in a new fuse box underneath the dash and under the hood. Change the wire wiring harnesses. And some of the grounds. What else can we look for it? It’s still not starting are cranking.

Please Log in or Create an account to join the conversation.

  • Christinak1130
  • Christinak1130's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
2 years 11 months ago #58731 by Christinak1130
Replied by Christinak1130 on topic 2007 Nissan Murano, code U1000, not communicating with BCM
It seems to be in the shifter. Because we had to use a shifter key to start a previous and now the gearbox in the dash doesn’t show a gear. What can I check?

Please Log in or Create an account to join the conversation.

  • Christinak1130
  • Christinak1130's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
2 years 11 months ago #58735 by Christinak1130
Replied by Christinak1130 on topic 2007 Nissan Murano, code U1000, not communicating with BCM
Yes Emc and BCM not communicating.

Please Log in or Create an account to join the conversation.

Time to create page: 0.484 seconds