*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

2013 Tacoma 2.7 liter rwd

  • Cheryl
  • Cheryl's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 2 weeks ago #58351 by Cheryl
2013 Tacoma 2.7 liter rwd was created by Cheryl
Does anyone have a connector location between the fuse box and fuel pump. On the diagram it shows ib1 but can’t find it on mitchell. Getting no power to the fuel pump

Please Log in or Create an account to join the conversation.

  • Tyler
  • Tyler's Avatar
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
3 years 2 weeks ago - 3 years 2 weeks ago #58389 by Tyler
Replied by Tyler on topic 2013 Tacoma 2.7 liter rwd
Probably too late, but IB1 seems to live at the drivers A-pillar:

Last edit: 3 years 2 weeks ago by Tyler.
The following user(s) said Thank You: Cheryl

Please Log in or Create an account to join the conversation.

  • Cheryl
  • Cheryl's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 2 weeks ago #58390 by Cheryl
Replied by Cheryl on topic 2013 Tacoma 2.7 liter rwd
Yea the connector was melted bypassed it
The following user(s) said Thank You: Tyler

Please Log in or Create an account to join the conversation.

Time to create page: 0.340 seconds