*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

2001 Ford Taurus SE OHV v6 well this is embarrassing…

  • popoften
  • popoften's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
More
3 years 1 month ago #58118 by popoften
2001 Ford Taurus SE OHV v6 well this is embarrassing… was created by popoften
Replaced leaky water pump, doing steps in reverse of removal and all that, but I cannot for the life of me remember where this goes (see part on magnetic pan on pic). This was, to my recollection, one of the first parts I took off. Any guidance appreciated! Thx Pop

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #58119 by Spacecataz
Replied by Spacecataz on topic 2001 Ford Taurus SE OHV v6 well this is embarrassing…
Thats a brace, in the same style as the one on the alt. So most likely connects from the alt bottom/back to the manifold or block.
The following user(s) said Thank You: Tyler

Please Log in or Create an account to join the conversation.

  • popoften
  • popoften's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
More
3 years 1 month ago #58120 by popoften
Replied by popoften on topic 2001 Ford Taurus SE OHV v6 well this is embarrassing…
Thank you! Right there near the compressor. Appreciate your help!

Please Log in or Create an account to join the conversation.

More
3 years 1 month ago #58121 by Spacecataz
Replied by Spacecataz on topic 2001 Ford Taurus SE OHV v6 well this is embarrassing…
Glad you got it sorted. We've all been there lol.

Please Log in or Create an account to join the conversation.

Time to create page: 0.243 seconds