*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)
Just made a new account? Can't post? Click above.
Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
Fuel injector Open circuit
- scott.scruggs
-
Topic Author
- Offline
- New Member
-
- Tyler
-
- Offline
- Moderator
-
- Full time HACK since 2012
3 years 3 weeks ago #57779
by Tyler
Replied by Tyler on topic Fuel injector Open circuit
Gotcha. 
I snipped this part of the diagram with all injectors for reference:
The #2 injector goes to pin 9 at C2 of the PCM. Here's a shot of that to make things easier:
But, if I could make a suggestion? If you're chasing an open injector circuit, you might be better off doing your initial testing at C130 (see the first diagram). It's a bulk connector on the back side of the front cylinder head. Much easier to access than then PCM itself, and makes for a nice divide-and-conquer testing point.
I snipped this part of the diagram with all injectors for reference:
The #2 injector goes to pin 9 at C2 of the PCM. Here's a shot of that to make things easier:
But, if I could make a suggestion? If you're chasing an open injector circuit, you might be better off doing your initial testing at C130 (see the first diagram). It's a bulk connector on the back side of the front cylinder head. Much easier to access than then PCM itself, and makes for a nice divide-and-conquer testing point.
Please Log in or Create an account to join the conversation.
Time to create page: 0.316 seconds