*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

SAS Calibration and possible reset.

  • michael.brady
  • michael.brady's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
3 years 2 months ago #57653 by michael.brady
SAS Calibration and possible reset. was created by michael.brady
Got a ABS Tract control and hill assist after changing clock spring Subaru 2013 Impreza. Fixed horn issue but have lights. Bought a 200.00 scanner to reset SAS but if adjustment is over 10 degrees it will re alarm.I ordered a Thinkcar m70 but it is uni directional so Can anyone recomend an entry level unit that could recalibrate and adjust clockspring and SAS which piggybacks on the CS to get it less than 10 degree adjustment.? Thanks

Please Log in or Create an account to join the conversation.

Time to create page: 0.282 seconds