*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

negative long term fuel trims

  • branaae
  • branaae's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
3 years 2 months ago #57429 by branaae
negative long term fuel trims was created by branaae
Hello,
I have E-book and have been trying to figure out why my 2004 Frontier V6 3.3l Supercharged truck always has negative long term fuel trims at -10 that is for both upstream sensors. Short term fuel trim is mostly at 0 or close to 0.
Truck runs really good and strong, but at idle it hesitates(not all the time).
I have p0132 and p0152 codes on my obd2.(high voltage)
Oxygen sensors have the correct resistance per the Truck repair manual.
Have been following ScannerDanner e-book and videos but havent been able to find something similar to my issue.
Would the negative long fuel trim be because of the supercharger?
Any help will be appreciated.

Please Log in or Create an account to join the conversation.

Time to create page: 0.249 seconds