Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

2011-2015 bt-50 3.2 diesel starts then stays

More
1 year 10 months ago #56931 by jacknutting1999@gmail.com
2011-2015 bt-50 3.2 diesel starts then stays was created by jacknutting1999@gmail.com
Morning, I have a bt50 that starts then stalls unless I have my foot down, as soon as I take it off it dies, fuel filter has been replaced and fuel pump works, just cuts out doesn't sound like fuel problem? Thanks

Please Log in or Create an account to join the conversation.

More
1 year 10 months ago #56944 by jacknutting1999@gmail.com
Replied by jacknutting1999@gmail.com on topic 2011-2015 bt-50 3.2 diesel starts then stays
Runs over 1000rpm as soon as it take m foot off and it goes below it shuts off

Please Log in or Create an account to join the conversation.

More
1 year 10 months ago - 1 year 10 months ago #57037 by Rallymechanic
Replied by Rallymechanic on topic 2011-2015 bt-50 3.2 diesel starts then stays
check MAP sensor, maybe clogged up.
It's located on top of the inlet manifold near the back.
Also the MAF, and these were known to split the intake tube after the MAF and before the turbo.
Need to also check the fuel rail pressure with a scan tool, the high pressure pump was know to break a spring and cause issues.
Last edit: 1 year 10 months ago by Rallymechanic.

Please Log in or Create an account to join the conversation.

Time to create page: 0.221 seconds