Scopes
1 year 10 months ago #56535
by Jesse c
Hello everyone I currently have a hantec auto scope 1008 I believe it is an have bedd we n doing ok with it so far but was looking at the pico 2000 two channel on eBay. Could I please get some advice on the scopes an what direction I should be going in. I don’t use it more than four times a year at the moment an sometimes not even that much!
Please Log in or Create an account to join the conversation.
- juergen.scholl
- Offline
- Platinum Member
- Active partschanger
Less
More
- Posts: 1197
- Thank you received: 446
1 year 10 months ago - 1 year 10 months ago #56540
by juergen.scholl
An expert is someone who knows each time more on each time less, until he finally knows absolutely everything about absolutely nothing.
Replied by juergen.scholl on topic Scopes
The link takes you to a comprehensive comparison of different scopes in an automotive environment. The mentioned hantek and pico scopes are covered....
With that little of scope use/practise it is difficult to become proficient at it and justify any considerable amount invested into it, isn´t it?
With that little of scope use/practise it is difficult to become proficient at it and justify any considerable amount invested into it, isn´t it?
An expert is someone who knows each time more on each time less, until he finally knows absolutely everything about absolutely nothing.
Last edit: 1 year 10 months ago by juergen.scholl.
Please Log in or Create an account to join the conversation.
- Andy.MacFadyen
- Offline
- Moderator
Less
More
- Posts: 3353
- Thank you received: 1031
1 year 9 months ago #56830
by Andy.MacFadyen
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
Replied by Andy.MacFadyen on topic Scopes
Watched that a while back and was impressed. My takeaway from was you can do good work with any scope but sure is nice to have the bells and whistles.
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
Please Log in or Create an account to join the conversation.
Time to create page: 0.256 seconds