Vantage pro primary ignition adaptor
5 years 5 months ago #24730
by Camo
Vantage pro primary ignition adaptor was created by Camo
Hey guys I have a vantage pro and wondering which probe you are using when testing primary circuits? As the vantage pro specs say max 200v but alot of primary circuits go up to 400v.
Please Log in or Create an account to join the conversation.
- Andy.MacFadyen
- Offline
- Moderator
Less
More
- Posts: 3353
- Thank you received: 1031
5 years 5 months ago #24774
by Andy.MacFadyen
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
Replied by Andy.MacFadyen on topic Vantage pro primary ignition adaptor
A voltage attenuator (voltage devider) will scale down the voltage they are available in x10, x20, x100 and x1000, From eBay they are fairly cheap to buy usually they use BNC connectors so you would need adaptor cables
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
The following user(s) said Thank You: Camo
Please Log in or Create an account to join the conversation.
5 years 5 months ago #24837
by Dmichnick
Replied by Dmichnick on topic Vantage pro primary ignition adaptor
ASEWave.com has alot of great adapters and you can get them in any style connectors.
Please Log in or Create an account to join the conversation.
5 years 5 months ago #24838
by Camo
Replied by Camo on topic Vantage pro primary ignition adaptor
Yes I just had a look at there site yday,cheers
Please Log in or Create an account to join the conversation.
Time to create page: 0.348 seconds