Amp Clamp Compensation

  • Paul P.
  • Paul P.'s Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 3 months ago #58324 by Paul P.
Amp Clamp Compensation was created by Paul P.
Mario Rojas at Super Mario Diagnostics has a new video out about Amp Clamp Compensation.

Definitely, a good watch to get our Amps clamps giving us Scaleable numbers on our scopes!!!!!



For all you folks that use a Hantek Clamp you can now use the Formula y=mx+c as well as the data table;

CC-65
Low 1 mV /10mA 20A 10x y=10x+0
High 1 mV /100mA 65A 100x y=100x+0

CC-650
Low 1mV/100mA 20A 100x y=100x+0
High 1mv/1A 650A 1000x y=1000x+0

Cheers!!!!
Never stop Learning.
The following user(s) said Thank You: Noah, oic5555, RichDIY

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago #58679 by Andy.MacFadyen
Replied by Andy.MacFadyen on topic Amp Clamp Compensation
Another way is to draw a straight line graph and read it off.
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)

Please Log in or Create an account to join the conversation.

Time to create page: 0.246 seconds