A place to discuss hardware/software and diagnostic procedures

Vantage pro

  • Guesty
  • Guesty's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 6 days ago #53976 by Guesty
Vantage pro was created by Guesty
Hi guys, went to use my vantage pro and can't get it to switch on.
Power button not lighting up, nothing. Working fine last time I used it, tried plugging in the mains lead and the 12v lead, No difference. Does anyone know of a known issue with these???
Hoping for a little direction
Many thanks.
Paul

Please Log in or Create an account to join the conversation.

  • juergen.scholl
  • juergen.scholl's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Active partschanger
More
4 years 6 days ago #53979 by juergen.scholl
Replied by juergen.scholl on topic Vantage pro
Make sure the CF-card is properly installed, without it the unit will not come to live.
An expert is someone who knows each time more on each time less, until he finally knows absolutely everything about absolutely nothing.
The following user(s) said Thank You: Noah

Please Log in or Create an account to join the conversation.

Time to create page: 0.271 seconds