*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)
Just made a new account? Can't post? Click above.
A place to discuss hardware/software and diagnostic procedures
WPS500 for pressure pulse testing?
- Tyler
-
Topic Author
- Offline
- Moderator
-
- Full time HACK since 2012
8 years 7 months ago #7920
by Tyler
WPS500 for pressure pulse testing? was created by Tyler
So I've got my eye on a WPS500, since my PV-350 is starting to act strangely. 
Erratic voltages, won't zero out at times, wondering if the wires are breaking inside the harness.
Anyway, I'm specifically wondering about Mode 3 on the WPS. -5 to 5 PSI sounds like it could be good for doing intake/exhaust/crankcase pulse waveforms, aka FirstLook sensors. Has anyone tried this, and how well does it work?
Probably won't have the same sensitivity as a FLS, but I can live with that as long as the waveforms are useable. :lol:
Erratic voltages, won't zero out at times, wondering if the wires are breaking inside the harness.Anyway, I'm specifically wondering about Mode 3 on the WPS. -5 to 5 PSI sounds like it could be good for doing intake/exhaust/crankcase pulse waveforms, aka FirstLook sensors. Has anyone tried this, and how well does it work?
Probably won't have the same sensitivity as a FLS, but I can live with that as long as the waveforms are useable. :lol:
Please Log in or Create an account to join the conversation.
Time to create page: 0.284 seconds