A place to discuss hardware/software and diagnostic procedures

Learning the multimeter

  • juergen.scholl
  • juergen.scholl's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Active partschanger
More
4 years 1 month ago #52971 by juergen.scholl
Learning the multimeter was created by juergen.scholl
For those who want to learn more about DVOM`s or just brush up a bit. This fluke presentaion is about 2 hours total and easy to digest.


fact.talentslms.com/unit/view/id:3696
An expert is someone who knows each time more on each time less, until he finally knows absolutely everything about absolutely nothing.
The following user(s) said Thank You: Noah

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
4 years 1 month ago #52978 by Noah
Replied by Noah on topic Learning the multimeter
Pasting the link into my browser leads to a dead end...
"Ground cannot be checked with a 10mm socket"
The following user(s) said Thank You: juergen.scholl

Please Log in or Create an account to join the conversation.

  • juergen.scholl
  • juergen.scholl's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Active partschanger
More
4 years 1 month ago #52979 by juergen.scholl
Replied by juergen.scholl on topic Learning the multimeter

Pasting the link into my browser leads to a dead end...


I hope this will work, just have to click on the start course button. Don't get bored with the 'low' entry level in chapter 1. If you hang on you will learn something about DVOMs you didn't know before,, rest assured.

www.fluke.com/en-us/learn/online-courses...basics-online-course
An expert is someone who knows each time more on each time less, until he finally knows absolutely everything about absolutely nothing.

Please Log in or Create an account to join the conversation.

Time to create page: 0.267 seconds