*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

A place to discuss hardware/software and diagnostic procedures

Autel IM608

  • simenad
  • simenad's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 4 months ago #50577 by simenad
Autel IM608 was created by simenad
Just wondering if anyone can help with my IM608 on a 14 vw Jetta tdi. Speedo showing about 20mph high even at a stop, no fault codes and shifting and turbo response is normal but I'm trying to read live speedo data thru the ECM but can't seem to navigate to a gauge/cluster module nor can I do find speedo live data in the ECM field. Posted this on Autel site but as usual, no get no responses. Don't think any english speakers actually use that forum.

Please Log in or Create an account to join the conversation.

More
4 years 4 months ago #50596 by AJeep18
Replied by AJeep18 on topic Autel IM608
Can you get into the ABS module? That might show some good data too. 

Please Log in or Create an account to join the conversation.

More
4 years 4 months ago #50607 by Andy.MacFadyen
Replied by Andy.MacFadyen on topic Autel IM608
How far is it out further up the speed range ?  Check it against GPS  and from the ABS and cruise control  this will give clue if it is a setting or a cluster fault.

" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)



Please Log in or Create an account to join the conversation.

Time to create page: 0.307 seconds