A place to discuss hardware/software and diagnostic procedures

Is there way to use vantage edge labscope to test for parasitic draw

More
3 years 7 months ago #42934 by rpd1125
Is there way to use vantage edge labscope to test for parasitic draw was created by rpd1125
Hi guys

Probably a silly question but my voltmeter failed on me earlier and wondering what or if any of you know of the set up of the scope to text parasitic draw test in milli amps with a labscope. I currently have the Snap on Vantage Legend lab scope


Hope to hear from you

Please Log in or Create an account to join the conversation.

More
3 years 7 months ago #42936 by Chad
Replied by Chad on topic Is there way to use vantage edge labscope to test for parasitic draw
You can:

1) Use an amp clamp around a battery cable.
2) Measure the voltage drop across a resistor placed in series with the battery cable.
3) Measure the voltage drop across fuses.

www.facebook.com/ScannerDanner/videos/716893045499187
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right. :-)
The following user(s) said Thank You: Noah

Please Log in or Create an account to join the conversation.

Time to create page: 0.240 seconds