A place to discuss hardware/software and diagnostic procedures

Can you use MAP gas instead of Propane for vacuum leaks

More
3 years 11 months ago #39960 by wdemr
Can you use MAP gas instead of Propane for vacuum leaks was created by wdemr
I was wondering if you can use MAP gas instead of propane to test for vacuum leaks?
Not looking to explode the top end while checking.
Thanks in advance,

Bill

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #39980 by Andy.MacFadyen
Replied by Andy.MacFadyen on topic Can you use MAP gas instead of Propane for vacuum leaks
Increase risk of pre-ignition and higher combustion temperature ... I really don't know
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
3 years 11 months ago #39983 by Noah
Replied by Noah on topic Can you use MAP gas instead of Propane for vacuum leaks
I have used map gas with mixed success as an alternative fuel source but haven't had the chance to try it on a vacuum leak yet.
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.178 seconds