HELLO : WHILE PERFORMING BACK PRESSURE TEST USING A GAUGE OTC7215......ANYWAY USING A SNAPON PRESSURE TRANSDUCER
TO A OSCILLOSCOPE TO MEASURE IT IN A WAVE FORM.HAS ANYONE DONE THIS? WILL IT BE SAFE ON THE TRANSDUCER OR WILL THE HOT EXHAUST BE TOO MUCH TO HANDLE? TS tspinat@aol.com
Carry out the test,while the exhaust is relativly cold,or use an extension hose attatched to the exhaust to keep the exspensive bit away from the hot exhaust,the 0-100 psi transducer on the lowest scale,