A place to discuss hardware/software and diagnostic procedures

Autel now authorized for SGW

  • John Curtis
  • John Curtis's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
5 years 10 months ago - 5 years 10 months ago #38443 by John Curtis
Autel now authorized for SGW was created by John Curtis
No more 12+8 needed! Going to save us all a lot of time.
Hopefully launch is next.
Making Pressure Differential Sensors (PDA Sensors) for pressure pulse diagnostics.
Currently servicing Central Texas.
Last edit: 5 years 10 months ago by John Curtis.
The following user(s) said Thank You: Noah, Andy.MacFadyen, Dtech494

Please Log in or Create an account to join the conversation.

More
5 years 10 months ago #38486 by Cheryl
Replied by Cheryl on topic Autel now authorized for SGW
So what is the procedure?? Is it included in the update price??

Please Log in or Create an account to join the conversation.

  • John Curtis
  • John Curtis's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
5 years 10 months ago #38487 by John Curtis
Replied by John Curtis on topic Autel now authorized for SGW
Cheryl you have to register Auto Auth here webapp.autoauth.com/
Still waiting on the update from Autel but it should be very soon.
Making Pressure Differential Sensors (PDA Sensors) for pressure pulse diagnostics.
Currently servicing Central Texas.
The following user(s) said Thank You: Noah, Dtech494

Please Log in or Create an account to join the conversation.

More
5 years 10 months ago #38606 by Dtech494
Replied by Dtech494 on topic Autel now authorized for SGW
Did anyone verify if the software update for Autel is out ?
I see its authorized but when I went and tried to select a dodge vehicle it
said to use the 12/8 cable.

Please Log in or Create an account to join the conversation.

More
5 years 9 months ago #38996 by Dtech494
Replied by Dtech494 on topic Autel now authorized for SGW
Autel's last update for Chrysler was Feb. I have been watching for newer update but have found one.
Does anyone know if the last update is for SGW ?

Please Log in or Create an account to join the conversation.

Time to create page: 0.288 seconds