A place to discuss hardware/software and diagnostic procedures
Transponder key testers?
4 years 7 months ago #33280
by Cheryl
Transponder key testers? was created by Cheryl
Does anyone have any testers to test if the transponder is good in a key? I am working on a Ford F-150 and getting a b1681 and don’t want to drop money on keys and don’t fix the issue plus I’d be able to add to my tools I already have
Please Log in or Create an account to join the conversation.
- Andy.MacFadyen
- Offline
- Moderator
Less
More
- Posts: 3353
- Thank you received: 1031
4 years 7 months ago #33293
by Andy.MacFadyen
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
Replied by Andy.MacFadyen on topic Transponder key testers?
I haven't seen anything that checks the response from the transponder chip but I have the tool that checks if the coil round the key barrel is transmitting when a key inserted
www.scannerdanner.com/forum/diagnostic-t...-purchase.html#23557
The DIY version is wrap a few coils of fine wire round the key and connect one end to scope + the other to ground with a fast screen you should see the coil on the car transmitting.
www.scannerdanner.com/forum/diagnostic-t...-purchase.html#23557
The DIY version is wrap a few coils of fine wire round the key and connect one end to scope + the other to ground with a fast screen you should see the coil on the car transmitting.
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
Please Log in or Create an account to join the conversation.
- cheryl hartkorn
- Offline
- Platinum Member
Less
More
- Posts: 692
- Thank you received: 130
4 years 7 months ago #33349
by cheryl hartkorn
Replied by cheryl hartkorn on topic Transponder key testers?
i have that same tool i used it on a 2004 f150 inserted key turned it led flashed okay cool tranciever is good. led me on a chase. it ended up being a bad ground at the module that goes around the lock cylinder.
Please Log in or Create an account to join the conversation.
Time to create page: 0.187 seconds