× A place to discuss hardware/software and diagnostic procedures

Snap on 19.4 update

  • Matts Auto
  • Topic Author
  • Offline
  • Premium Member
  • Premium Member
More
21 Aug 2019 21:15 #33037 by Matts Auto
Snap on 19.4 update was created by Matts Auto
FYI. Was Informed by snap on tech rep today that included in 19.4 update will be access through OBD2 port for newer Chrysler gateway. No need for removing radio to access data connector but will also need to get a 1 year subscription through Chrysler for $50. He claimed he will get me the literature in the next day or two. I will update when I receive more info.
The following user(s) said Thank You: Noah, Tyler

Please Log in or Create an account to join the conversation.

  • Matts Auto
  • Topic Author
  • Offline
  • Premium Member
  • Premium Member
More
22 Aug 2019 14:03 #33065 by Matts Auto
Replied by Matts Auto on topic Snap on 19.4 update
for information on secure gateway through snap on go to snapon.com/gateway

Please Log in or Create an account to join the conversation.

More
27 Aug 2019 18:38 #33182 by Cheryl
Replied by Cheryl on topic Snap on 19.4 update
That 50 bucks might be worth it considering you won’t have to remove the radio in every newer Chrysler we work on

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Massachusetts, USA
More
04 Sep 2019 19:14 #33421 by Noah
Replied by Noah on topic Snap on 19.4 update
Apparently whatever tool you have needs to be wifi capable as well. So my Solus Ultra wouldn't be up to the task, but a newer or more capable tool would

"Learn, apply, repeat."

Please Log in or Create an account to join the conversation.

  • Matts Auto
  • Topic Author
  • Offline
  • Premium Member
  • Premium Member
More
04 Sep 2019 19:31 #33422 by Matts Auto
Replied by Matts Auto on topic Snap on 19.4 update
I believe all the edge platforms and above are capable.
The following user(s) said Thank You: Noah

Please Log in or Create an account to join the conversation.

More
10 Sep 2019 13:06 #33527 by Cheryl
Replied by Cheryl on topic Snap on 19.4 update
Does anyone know what is new in this update besides the pre and post scans that is kinda useless for diagnosing. The last few updates have been adas stuff not programming or relearning of components

Please Log in or Create an account to join the conversation.

More
19 Sep 2019 16:15 #33687 by ASE Doc
Replied by ASE Doc on topic Snap on 19.4 update
I haven't looked at what's new in 19.4. I have always updated each fall using Snappy's two for one special. My Modis Ultra's on 18.4 now. I'm honestly thinking of skipping a year. I've had the Modis Ultra for 4 years and if I update this fall, I'll owe $4,000 on the tool after 4 years of payments, three of those years I've made double payments. That sucks. I think maybe I'll just focus on paying the tool off instead. I do love the Modis Ultra. It's my favorite of all the diag tools I've ever used. I use the scope as much as the scanner.

Please Log in or Create an account to join the conversation.

  • Not Allowed: to create new topic.
  • Not Allowed: to reply.
  • Not Allowed: to add attachements.
  • Not Allowed: to edit your message.
Time to create page: 0.539 seconds