A place to discuss hardware/software and diagnostic procedures

I have a Vantage MT2400

More
4 years 11 months ago #29075 by Glen 1970
I have a Vantage MT2400 was created by Glen 1970
Hi my nane is Jay i have a Vantage MT 2400 that the memory card has and Error. Is there a nother meter that can help me back probe sensors that dont cost over a thousand dollars. I also have old 2500 scand tool thats out dated. It be nice to find a tool that will do both.

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #30050 by johnathon.balderas
Replied by johnathon.balderas on topic I have a Vantage MT2400
They sell memory cards on ebay often for those units.

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #30161 by Glen 1970
Replied by Glen 1970 on topic I have a Vantage MT2400
SO FAR I HAVE NOT FOUND ANY ON EBAY

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #30162 by johnathon.balderas
Replied by johnathon.balderas on topic I have a Vantage MT2400
There is one on Ebay for 200

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #30779 by johnathon.balderas
Replied by johnathon.balderas on topic I have a Vantage MT2400
one for 55 on ebay right now

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
4 years 10 months ago #30814 by Noah
Replied by Noah on topic I have a Vantage MT2400
That's gonna go fast.
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.206 seconds