A place to discuss hardware/software and diagnostic procedures
Harbor Freight, Zurich Zpro
5 years 4 days ago #28876
by scotth
Harbor Freight, Zurich Zpro was created by scotth
I recently purchased a scanner from Harbor Freight, Zurich Zpro. Has anyone had any experience with this Scanner. Pros and Cons?
Not sure if I want to keep it. I've heard mixed reviews.
Any information or opinions would be greatly appreciated.
Thank you.
Not sure if I want to keep it. I've heard mixed reviews.
Any information or opinions would be greatly appreciated.
Thank you.
Please Log in or Create an account to join the conversation.
5 years 4 days ago #28877
by Dylan
Replied by Dylan on topic Harbor Freight, Zurich Zpro
Welcome to the forum! I moved your post from the welcome mat over here. We have all these different sections and it can be hard in the beginning to know where to put your post. But we're here to help
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 4422
- Thank you received: 961
5 years 3 days ago #28886
by Noah
"Ground cannot be checked with a 10mm socket"
Replied by Noah on topic Harbor Freight, Zurich Zpro
I'm interested to hear your experience with it.
Looks like a rebadged autel, so it should be a decent tool.
Keep up posted!
Looks like a rebadged autel, so it should be a decent tool.
Keep up posted!
"Ground cannot be checked with a 10mm socket"
Please Log in or Create an account to join the conversation.
5 years 3 days ago #28914
by GypsyR
Replied by GypsyR on topic Harbor Freight, Zurich Zpro
Rumor has it from another forum that it is a "hobbyist" oriented version of an Autel scanner. Only a rumor and so far I haven't heard of anyone being able to do a side-by-side to prove that and see what differences there may be if it is indeed a rebadged Autel. A number of people are interested.
Please Log in or Create an account to join the conversation.
Time to create page: 0.211 seconds