×
ScannerDanner Premium Customer Support (15 Mar 2019)

Please add This email address is being protected from spambots. You need JavaScript enabled to view it. as a contact in your email system. I am having a very hard time communicating with some of you because my reply messages are ending up in your spam folder! So please check your spam folders too!

× A place to discuss hardware/software and diagnostic procedures

Chassis ears

  • Ben
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
12 Apr 2019 12:52 #28625 by Ben
Chassis ears was created by Ben
Anyone have a recommendation for a good chassis ears (wired or wireless) I have the steelman wired chassis ears and it sucks... a Mic dies every time i use it and the control box has way to much variance in volume between channels for example channel 6 is twice as loud as any other channels and the rest are all around 20% different from each other....

It's such a handy tool that I don't want to do without 1 I just hate this 1....

So any recommendations?

Sent from my SM-N920P using Tapatalk

Please Log in or Create an account to join the conversation.

More
13 Apr 2019 17:35 #28656 by Deltron
Replied by Deltron on topic Chassis ears
I've had awful experiences with Steelman products as well. My 6 channel wired kit, the control box completely died the third time I used it. Steelman won't warranty. I decided to give their wireless kit a chance, and the microphones don't work with Samsung Bluetooth. $400 worth of 2 kits and neither of them work. I'd love to know about anothet option.

Please Log in or Create an account to join the conversation.

  • Andy.MacFadyen
  • Andy.MacFadyen's Avatar
  • Away
  • Moderator
  • Moderator
More
14 Apr 2019 00:14 #28672 by Andy.MacFadyen
Replied by Andy.MacFadyen on topic Chassis ears
The cheap Chinese clone ones have exactly the same issues, the microphones need to be subject to much stricter quality control.
I usually reach for my Gunson single channel electronic stethoscope.

"There's always a catch ---- Catch OBD2 ."


Please Log in or Create an account to join the conversation.

  • Not Allowed: to create new topic.
  • Not Allowed: to reply.
  • Not Allowed: to add attachements.
  • Not Allowed: to edit your message.
Time to create page: 0.469 seconds