A place to discuss hardware/software and diagnostic procedures

Ignition igniter not firing the coil scope waveform pattern (Distributor system)

  • toyota1990s
  • toyota1990s's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
7 years 5 months ago - 7 years 5 months ago #23082 by toyota1990s
Ignition igniter not firing the coil scope waveform pattern (Distributor system) was created by toyota1990s
Hello, just an idle question concerning scope testing an ignition system.

If i was to take a scope waveform on a distributor AC pick up coil system for a suspected failed ignition igniter that is not firing the coil, what would the scope waveform look like please?

I've seen both primary and secondary ignition waveform's, but cannot find a waveform with a failed igniter.

Thanks

Steve
Last edit: 7 years 5 months ago by toyota1990s. Reason: Adjust title subject

Please Log in or Create an account to join the conversation.

  • Chad
  • Chad's Avatar
  • Offline
  • Moderator
  • Moderator
  • I am not a parts changer.
More
7 years 5 months ago #23087 by Chad
Replied by Chad on topic Ignition igniter not firing the coil scope waveform pattern (Distributor system)
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right. :-)
Attachments:
The following user(s) said Thank You: Noah

Please Log in or Create an account to join the conversation.

Time to create page: 0.262 seconds