A place to discuss hardware/software and diagnostic procedures

snap on solus pro

More
6 years 6 months ago #14133 by joecar
snap on solus pro was created by joecar
Hi, I'm new to forums but looking to learn----Just bought a 2014 Chrysler T&C -- hooked up my 15.2 Solus Pro ---all modules on oem side communicated except pcm & tcm. Instead I got: " system version not found in database version num: 25c7". I searched the web---nothing---can anyone tell me why?

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago - 6 years 6 months ago #14134 by Chad
Replied by Chad on topic snap on solus pro
I couldn't say with any certainty, but I would speculate that the PCM & TCM have an updated flash? The 15.2 software covers 2014, but just barely. If there was a flash update put out AFTER 2014, the 15.2 software would know nothing about it.

Just a guess.
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right. :-)
Last edit: 6 years 6 months ago by Chad.
The following user(s) said Thank You: joecar

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
6 years 6 months ago #14164 by Noah
Replied by Noah on topic snap on solus pro
I bet you're right on the money about that!

You should still be able to communicate through obd direct for data anyway...
"Ground cannot be checked with a 10mm socket"
The following user(s) said Thank You: joecar

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
6 years 6 months ago #14165 by Noah
Replied by Noah on topic snap on solus pro
Oh, and I moved this to diagnostic tools and techniques for you ;)
"Ground cannot be checked with a 10mm socket"
The following user(s) said Thank You: joecar

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #14196 by The Auto Tech
Replied by The Auto Tech on topic snap on solus pro
You need to update the tool. I had this same problem with my solus ultra.
The following user(s) said Thank You: joecar

Please Log in or Create an account to join the conversation.

More
6 years 1 month ago #19875 by wesley
Replied by wesley on topic snap on solus pro
I like to find the solus pro training by scannerdanner that use to be on youtube

Please Log in or Create an account to join the conversation.

Time to create page: 0.315 seconds