Am wanting to just 'practice doing a TPMS relearn on this truck. I see no where in the Tech2Win software there is any options to do this
Very very new to tech2win ,though. I can see on the older trucks circa 2005-2006 there is a few TPMS options there.
Am i not menuing through the items correctly?
If I remember right, the TPMS functions on that Suburban are handled by the Remove Control Door Lock Receiver. You might find it in the module list abbreviated as RCDLR.
@Tyler
I looked through all the options in Tech2Win,and see nothing for year 2010 Suburban in regards to RCDLR or TPMS .
It does appear for TPMS if i go clear back to year 2005 Suburban but is a totally different ECU than a 2010 of course. Finding out the Tech2Win software is pretty antiquated actually.
Should have sprung for a higher end ODBII scanner for sure.
Thanks again
Topic Author
