inverting waveforms

More
5 years 7 months ago #22832 by robert.lesaca
inverting waveforms was created by robert.lesaca
I have a 4423 Picoscope. Im wondering if it is possible to invert a waveform (like the amp probe, if you get an inverted signal, you just turn the probe the other way and reset to zero)

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago - 5 years 7 months ago #22837 by Dylan
Replied by Dylan on topic inverting waveforms
Moving this to diagnostic section -> lab scope discussion.
Last edit: 5 years 7 months ago by Dylan.

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago - 5 years 7 months ago #22841 by Chad
Replied by Chad on topic inverting waveforms

robert.lesaca wrote: I have a 4423 Picoscope. Im wondering if it is possible to invert a waveform (like the amp probe, if you get an inverted signal, you just turn the probe the other way and reset to zero)



Tools/Math Channels/Invert A or B

You can, then, go to Views/Channels and turn off A or B, leaving only the invert.
"Knowledge is a weapon. Arm yourself, well, before going to do battle."
"Understanding a question is half an answer."
I have learned more by being wrong, than I have by being right. :-)
Last edit: 5 years 7 months ago by Chad.

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago #22846 by robert.lesaca
Replied by robert.lesaca on topic inverting waveforms
Thank you Sir so much....much apprreciated.

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago #23176 by Bigfoote13
Replied by Bigfoote13 on topic inverting waveforms
Thanks for that I was wondering the same thing. Just yesterday I had to waveforms of an ignition capture up and one was upside down for some reason. It was kind of cool and comparing them but I was wondering how do you invert the darn thing. Now I know!

Please Log in or Create an account to join the conversation.

Time to create page: 0.250 seconds