Welcome to the Free YouTube Video Page!

Welcome to the ScannerDanner Free YouTube video page! We have YouTube videos from the beginning to September 2012 and January 2016 till now. We will be filling in the missing videos as time goes on. Please check back often!

Join me and two of my close friends Tommy Wolfe and Mike Maleski (see below for contact info) on a road trip in the RV as we go pick up my new Jeep.

Add a comment

In this video I will show you how to troubleshoot and replace the transmission output speed sensor also known as a vehicle speed sensor.

Add a comment

Was it from a faulty wiring harness or from recent work that was done. You be the judge. If this was a harness issue, you will see it in the replies to this video.

Add a comment

In this part 2 of 2 video I will show you how install new upper and lower ball joints on a 1995 Jeep Cherokee (XJ). This was part of my prep for flat towing behind my RV. Here is the link to part 1 (removal of the old ball joints)

Add a comment

In this video I will be showing you how to replace the upper and lower ball joints on a 1995 Jeep Cherokee (XJ). This was part of my prep for flat towing behind my RV.

Add a comment

1998 Chevy 5.7 misfire (P0300) and fuel system too lean (P0171 and P0174) trouble codes AFTER the intake manifold was removed. This is the same van that I shot two different videos on, one for each of my channels.

Add a comment

I will show you how to troubleshoot the entire ignition system, including cam and crank signals, ECU to igniter control and igniter to ignition coil control using a simple test light. A follow up test will be done with a small single channel lab scope, showing yet another way to verify the same condition.

Add a comment