In this final part I will be replacing the LF and RR calipers as well as doing a brake fluid flush/change. If I would have done this a few times since owning this vehicle, I believe my caliper pistons would not have been sticking.
Topics covered
- how to replace a brake caliper
- which direction should the brake squealers face
- how to do a brake system flush
- torque specs for caliper pins and guides
- how to bleed brakes
- how to remove the old fluid from the master cylinder
- why you should change your brake fluid
Tools used
- Siphon Pump Kit (better than the one I used)
- Bayco NSR-2168B LED Rechargeable Work Light - 600 Lumens w/3 Magnets Lithium-ion Battery
- Pistol-Grip Grease Gun
- Permatex 26080 Synthetic Caliper Grease
- (Ratchet set I just purchased that I mentioned in the video) Gearwrench 81230P 4 Pc. 120Xp Flex Teardrop Ratchet Set
- OTC (5300) Stinger 3 Ton Jack Pack
- Dewalt DCD760KL 18V Drill/Driver Kit 1/2"
- Performance Tool W1223 3" Wire Wheel - Fine
- DEWALT DCF883M2 20-volt MAX Lithium Ion 3/8-Inch Impact Wrench Kit with Hog Ring
- Milwaukee 2457-20 M12 3/8 Ratchet tool Only
- Milwaukee 48-11-2401 (2) M12 RED LITHIUM 2.0 12-Volt Lithium-ion Cordless Battery and (1) 48-59-2401 12Volt Lithium Battery Charger NEW
- Channellock 480 20-1/4" Tongue and Groove Pliers
- Kimberly Clark 32992 Pro Shop Towels