Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

2011 GMC Acadia weirdness - ROUND 2... FIGHT

More
2 years 8 months ago #50839 by juergen.scholl
Replied by juergen.scholl on topic 2011 GMC Acadia weirdness - ROUND 2... FIGHT
Without going through all the previous captures .... although #6 looks worst it appears to affect the whole bank?!

Any chance/interest to measure the actual piston position/height/clearance at TDC just in case something was wrong with the rod?
An expert is someone who knows each time more on each time less, until he finally knows absolutely everything about absolutely nothing.

Please Log in or Create an account to join the conversation.

More
2 years 7 months ago - 2 years 7 months ago #51115 by samuel.barajas
Replied by samuel.barajas on topic 2011 GMC Acadia weirdness - ROUND 2... FIGHT


 



How did you make or where do you got that overlay table from ? neat...

Last edit: 2 years 7 months ago by samuel.barajas. Reason: From

Please Log in or Create an account to join the conversation.

More
2 years 7 months ago - 2 years 7 months ago #51149 by Tyler
Replied by Tyler on topic 2011 GMC Acadia weirdness - ROUND 2... FIGHT
That's Engine Timing Overlays from The Driveability Guys. It's no longer available, unfortunately. :( This is a decent alternative:

www.scannerdanner.com/forum/diagnostic-t...veform-overlays.html
Last edit: 2 years 7 months ago by Tyler.
The following user(s) said Thank You: samuel.barajas

Please Log in or Create an account to join the conversation.

More
2 years 7 months ago #51153 by Matt T
Replied by Matt T on topic 2011 GMC Acadia weirdness - ROUND 2... FIGHT

That's Engine Timing Overlays from The Driveability Guys. It's no longer available, unfortunately. :(
 
Can still buy it as a stand alone program. It's the larger software package it used to be a part of that got "discontinued".................

driveabilityguys.com/software-and-tools .
The following user(s) said Thank You: samuel.barajas

Please Log in or Create an account to join the conversation.

More
2 years 7 months ago #51158 by Tyler
Replied by Tyler on topic 2011 GMC Acadia weirdness - ROUND 2... FIGHT

That's Engine Timing Overlays from The Driveability Guys. It's no longer available, unfortunately. :(

 
Can still buy it as a stand alone program. It's the larger software package it used to be a part of that got "discontinued".................

driveabilityguys.com/software-and-tools .
My mistake! :blush: I thought they weren't able to offer that software any more...

Please Log in or Create an account to join the conversation.

More
2 years 7 months ago #51171 by samuel.barajas
Replied by samuel.barajas on topic 2011 GMC Acadia weirdness - ROUND 2... FIGHT
So can you sync that with any waveform or does ir work with a particular software? Does it work with Pico?

Please Log in or Create an account to join the conversation.

More
2 years 7 months ago #51172 by Tyler
Replied by Tyler on topic 2011 GMC Acadia weirdness - ROUND 2... FIGHT
There's no specific software requirement, other than Windows. ;) It's set up to work with an ignition sync of one kind or anther.

It works with Pico, but Pico also has similar rules built in.

Please Log in or Create an account to join the conversation.

Time to create page: 0.213 seconds