A place to discuss hardware/software and diagnostic procedures
Maxisys Elite
- montanezrf
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
6 years 7 hours ago #20079
by montanezrf
Replied by montanezrf on topic Maxisys Elite
Well, what's the consensus then?:
Bosch Mastertech for programming and Autel regular 908 or.... the MAXISYS ELITE?
Heard the Bosch have OEM NASTF SUPPORT; ....not the AUTEL ELITE.
Bosch Mastertech for programming and Autel regular 908 or.... the MAXISYS ELITE?
Heard the Bosch have OEM NASTF SUPPORT; ....not the AUTEL ELITE.
Please Log in or Create an account to join the conversation.
- montanezrf
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
5 years 10 months ago - 5 years 10 months ago #21129
by montanezrf
Replied by montanezrf on topic Maxisys Elite
Yeh, I bought the Maxisys ELITE for many reasons. With many ups and just very few downs (internet connection to Autel community from the Caribbean), I think is the best scanner out there under $3,000.
Last edit: 5 years 10 months ago by montanezrf.
Please Log in or Create an account to join the conversation.
5 years 5 months ago #24293
by boss302
Replied by boss302 on topic Maxisys Elite
I just went through this on my 2012 6.7 powerstroke where I had to change out injector #4 and needed to change the IQA code however, I couldn't fiqure out how to do it. I finally took it to Ford to get the IQA code changed. I hope it will do the Ford and it was just an error on my part.
Randall
Randall
Please Log in or Create an account to join the conversation.
3 years 7 months ago - 3 years 7 months ago #42710
by tuita
Replied by tuita on topic Maxisys Elite
Last edit: 3 years 7 months ago by tuita.
Please Log in or Create an account to join the conversation.
Time to create page: 0.208 seconds